Configuring Scheme Authentication For Telnet Login - HP FlexFabric 7900 Series Configuration Manual

Step
6. (Optional.) Assign a
user role.
The next time you attempt to Telnet to the device, you must provide the configured login password, as
shown in Figure
the message "All user lines are used, please try later!" appears.
Figure 10 Password authentication interface for Telnet login

Configuring scheme authentication for Telnet login

Step
1. Enter system view.
2. Enable Telnet server.
3. Enter VTY line view or
class view.
Command
user-role role-name
10. If the maximum number of login users has been reached, your login attempt fails and
Command
system-view
telnet server enable
•
To enter VTY line view:
line vty first-number
[ last-number ]
•
To enter VTY line class
view:
line class vty
Remarks
By default, a VTY line user is assigned
the user role network-operator.
Remarks
N/A
By default, the Telnet server function is
disabled.
Use either command.
A setting in user line view is applied only to
the user line. A setting in user line class
view is applied to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user
line view takes precedence over a
non-default setting in user line class view.
A setting in user line view takes effect
immediately and affects the online user. A
setting in user line class view does not
affect online users and takes effect only for
users who log in after the configuration is
completed.
28