Pentek 6210 Operating Manual page 163

PACKAGE DESCRIPTIO
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCH (0.254mm)
0.008 – 0.010
(0.203 – 0.254)
* DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
** DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
Dimensions in inches (millimeters) unless otherwise noted.
8-Lead PDIP (Narrow 0.300)
(LTC DWG # 05-08-1510)
0.300 – 0.325
(7.620 – 8.255)
0.009 – 0.015
(0.229 – 0.381)
+0.035
0.325
–0.015
( )
+0.889
8.255
–0.381
8-Lead Plastic Small Outline (Narrow 0.150)
(LTC DWG # 05-08-1610)
0.010 – 0.020
× 45°
(0.254 – 0.508)
0°– 8° TYP
0.016 – 0.050
(0.406 – 1.270)
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
N8 Package
0.400*
(10.160)
MAX
8 7 6
0.255 ± 0.015*
(6.477 ± 0.381)
1 2
3
0.045 – 0.065
(1.143 – 1.651)
0.065
(1.651)
TYP
0.100
(2.54)
BSC
S8 Package
0.189 – 0.197*
(4.801 – 5.004)
8 7 6
0.228 – 0.244
(5.791 – 6.197)
1 2 3
0.053 – 0.069
(1.346 – 1.752)
0.014 – 0.019
(0.355 – 0.483)
TYP
LTC1451
LTC1452/LTC1453
5
4
0.130 ± 0.005
(3.302 ± 0.127)
0.125
0.020
(3.175)
MIN
(0.508)
0.018 ± 0.003
MIN
(0.457 ± 0.076)
N8 1098
5
0.150 – 0.157**
(3.810 – 3.988)
4
0.004 – 0.010
(0.101 – 0.254)
0.050
(1.270)
BSC
SO8 1298
11