Pentek 6210 Operating Manual page 111

a
FEATURES
65 MSPS Minimum Sample Rate
80 dB Spurious-Free Dynamic Range
IF-Sampling to 70 MHz
710 mW Power Dissipation
Single +5 V Supply
On-Chip T/H and Reference
Twos Complement Output Format
3.3 V or 5 V CMOS-Compatible Output Levels
APPLICATIONS
Cellular/PCS Base Stations
Multichannel, Multimode Receivers
GPS Anti-Jamming Receivers
Communications Receivers
Phased Array Receivers
PRODUCT DESCRIPTION
The AD6640 is a high speed, high performance, low power,
monolithic 12-bit analog-to-digital converter. All necessary
functions, including track-and-hold (T/H) and reference are
included on-chip to provide a complete conversion solution.
The AD6640 runs on a single +5 V supply and provides CMOS-
compatible digital outputs at 65 MSPS.
Specifically designed to address the needs of multichannel,
multimode receivers, the AD6640 maintains 80 dB spurious-
free dynamic range (SFDR) over a bandwidth of 25 MHz.
Noise performance is also exceptional; typical signal-to-noise
ratio is 68 dB.
The AD6640 is built on Analog Devices' high speed complemen-
tary bipolar process (XFCB) and uses an innovative multipass
architecture. Units are packaged in a 44-terminal Plastic Thin
Quad Flatpack (TQFP) specified from –40°C to +85°C.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
IF Sampling A/D Converter
FUNCTIONAL BLOCK DIAGRAM
AV
DV
CC CC
AIN
TH1
BUF
AIN
+2.4V
V
REF
REFERENCE
ENCODE INTERNAL
TIMING
ENCODE
MSB
GND
PRODUCT HIGHLIGHTS
1. Guaranteed sample rate is 65 MSPS.
2. Fully differential analog input stage specified for frequencies
up to 70 MHz; enables "IF Sampling."
3. Low power dissipation: 710 mW off a single +5 V supply.
4. Digital outputs may be run on +3.3 V supply for easy inter-
face to digital ASICs.
5. Complete Solution: reference and track-and-hold.
6. Packaged in small, surface mount, plastic 44-terminal TQFP.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700 World Wide Web Site:
Fax: 781/326-8703
12-Bit, 65 MSPS
AD6640
TH2 TH3 A
ADC DAC
AD6640
6
DIGITAL ERROR CORRECTION LOGIC
D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
http://www.analog.com
© Analog Devices, Inc., 1998
ADC
7
LSB