Pentek 6210 Operating Manual page 11

Pe nt e k Mo del 6210 Oper ating Manual
1.7 Specifications
Signal Purity
Front End Performance w/ Programmable Amp
Harmonic Distortion:
Signal/Noise Ratio (30 MHz) −50 dB
Spur Free Dynamic Range:
Crosstalk:
Front End Performance w/o Programmable Amp
Harmonic Distortion:
Signal/Noise Ratio (30 MHz) −60 dB
Spur Free Dynamic Range:
Crosstalk:
Sample Rate Control
Clock Source:
Internal:
External:
Sample Rate Divider:
Digital Receiver
Device:
Quantity:
Data Source:
Clock Source:
Bypass:
Sync:
* − Data Sheet
Front Panel
Analog Input:
Sample Clock:
Sync:
VIM Motherboard Functions
VIM Motherboard Reset:
(continued)
Standard:
Option 020:
Oprion 021:
included as Appendix
−60 dB
−65 dB
−60 dB @ 1 MHz
−70 dB
−70 dB
−60 dB @ 1 MHz
Onboard crystal oscillator
64 MHz
65 MHz
53.125 MHz
Front Panel Low−Voltage Differential Signal (LVDS)
65 MHz max.
internal or external source can be divided by
1, 2, 4, 8, or 10 .
Intersil HSP50214*
2
Associated A/D (A/D 1 to DDR 1, A/D 2 to DDR 2)
Same as associated A/D source.
Under software control, each DDR can be bypassed
individually to provide A/D output to the BI−FIFO
interface.
Provided through VIM motherboard−driven
control register or via front panel connector.
A, courtesy of Intersil Corp., Palm Bay, FL.
2 SMA Connectors (1 per channel)
Multipin connector (programmable as input or output
− differential LVDS compatible only) and 1 SMA
connector (also LVDS only)
Multipin connector (programmable as input or
output − differential LVDS compatible only) and
one TTL input
Provides access to VIM Motherboard XDS connec−
tor and status LEDs
Front panel control
P age 11
Rev.: C