Safety
If the service life is reached, the user or a responsible attendant should contact the qualified personnel who fitted
the product or the manufacturer's service (see inside or outside of rear cover for address).
3 Safety
3.1 Explanation of Warning Symbols
Warnings regarding possible risks of severe accident or injury.
WARNING
Warnings regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
3.2 General safety instructions
WARNING
Lack of instruction
Risk of falling, tipping over
► Instruct the user in the proper use of the product when handing it over.
► We recommend the preparation of an acceptance protocol.
CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product
► When working, use only tools that are suitable for the conditions at the workplace and whose proper use
ensures safety and health protection.
NOTICE
Tipping or falling of the product
Damage to the product
► When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping device to secure the product for all work at a workbench.
NOTICE
Use of unsuitable packaging
Damage caused by transport in the wrong packaging
► Use only the original packaging for delivery of the product.
3.3 Safety instructions for assembly
CAUTION
Unsecured screw connections
Risk of pinching, crushing, tipping over, falling of user
► After all adjusting/readjusting work, retighten the mounting screws/nuts firmly. Observe any torque settings
which may be specified.
► Any time you loosen a screw connection with thread lock, replace it with a new screw connection or secure
the old screw connection with medium strength thread locker (e.g. Loctite 241
CAUTION
Improper use of self-locking nuts
Risk of the user falling or tipping over
► Always replace self-locking nuts with new self-locking nuts after disassembly.
6 | Ottobock
®
).
Kimba neo