Five-Point Belt - Otto Bock Kimba neo Instructions For Use Manual

Preparation for Use

5.2.2.4 Five-point belt

1 Clip with rivet
2 Shoulder belt, left/right
3 Belt pads
4 Strap guide with attachment fitting
5 Lap-belt part, left/right
Installation start
1) Mount the loose strap guide on the right (4) according to the chapter "Strap guide" (see Page 10).
2) Rivet 2 clips (1) to the holes of the bottom back plate (see Fig. 15, Pos. 2).
3) Run the shoulder belts (2) through the padding/back plate (see Fig. 16) and secure them in the clips (see
Fig. 15, Pos. 3).
14 | Ottobock
15
6 Strap guide, fixed
7 Belt restraint
8 Adjustment buckle
9 Crotch belt with buckle and adjustment buckle
10 Stop plate
16
17
Kimba neo