Remote Upgrades - EdgeWave iPrism Web Security Administration Manual

iPrism

Remote Upgrades

System upgrades for remote users can be scheduled during non-peak periods if needed. Set up the
defaults that will apply to most systems, and then add exceptions if needed, for specific machines or
ranges of machines.
To set up remote upgrades:
From the iPrism home page, select Users & Networks, then Remote Upgrades.
1.
Note: If you have just enabled Remote Filtering, the available Remote
Upgrades may not yet be visible on this page. If this occurs, log out then log in
again to see the available Remote Upgrades.
Set the defaults as they apply to PC and/or Mac systems.
2.
• Select Enabled to turn on remote upgrades, or Disabled to turn off remote upgrades. If
remote upgrades are disabled for a type of machine (e.g., Mac), you can enable them for
specific IDs using the Exceptions settings.
• Select an upgrade package from the dropdown list. Only available packages for the machine
type are listed.
• Choose the dates and times during which this upgrade will be applied. If a specific machine is
unavailable at this time, it will not get the upgrade.
• Check Force Reboot if you want each machine to automatically reboot and complete the
upgrade.
Chapter 4 Users & Networks
Administration Guide
82