EdgeWave iPrism Web Security Administration Manual page 165

iPrism
To choose the master settings to be applied to the slaves, click Manage Policies.
6.
Select which set of policies to apply and click OK. See
7.
descriptions.
To add slaves, in the Slave iPrism Appliances frame, click Add.
8.
Type the IP address of the slave. Note that you must have already designated this iPrism as a
9.
slave. See Designating Slave
Click OK. The change is applied immediately.
10.
To add another slave, repeat steps 8-10.
11.
Chapter 9 Central Management
Figure 103. Designate Master
Systems.
Central Management Policies
Administration Guide
for
154