Designating The Master System - EdgeWave iPrism Web Security Administration Manual

iPrism

Designating the Master System

Log into the iPrism you want to designate as a master.
1.
From the iPrism home page, select System Settings, then Central Management.
2.
Select Master from the iPrism Mode dropdown list.
3.
The mode changes to Master, and a notification message appears when this is complete.
4.
If the password has not already been set, click Set Password and enter the password to be
5.
used. This password must be the same for all iPrisms that are included in the Central
Management configuration.
Chapter 9 Central Management
Figure 102. Designate Slave
Administration Guide
153