Deleting An Admin Role; Exceptions; Adding An Exception - EdgeWave iPrism Web Security Administration Manual

iPrism

Deleting an Admin Role

In the Admin Roles window, select a role and click Delete.
1.
Click Yes to confirm.
2.

Exceptions

iPrism's goal on your network is to act as a web filter for access to the Internet. In fact, this is how it is
able to perform its monitoring and blocking tasks. You may want to implement reduced or additional
filtering for specific situations.
Exceptions make iPrism ignore traffic coming from or going to a range of hosts (e.g., a corporate
web server located in a DMZ or internal servers accessing the Internet without authentication).
Specific examples of the most commonly used types of exceptions are in the iPrism Knowledgebase
section on Exceptions.
Note: HTTPS (SSL) traffic on port 443 is now strictly enforced by default. If you
do not use SSL but do use port 443, either change the application port or create
a filter exception for the client/server addresses.
To work with exceptions:
From the iPrism home page, click Users & Networks, then Exceptions.
1.
Add, change, and delete exceptions as needed.
2.
When you are finished click Save at the bottom of the Exceptions window.
3.
If you have completed all your administrative changes, click Activate Changes to activate the
4.
changes immediately. If you do not Activate Changes now, you will be prompted to do so before
logging out of iPrism.

Adding an Exception

From the Exceptions window, click Add.
1.
Chapter 4 Users & Networks
Administration Guide
75