Configuring Smtp Relay Settings - EdgeWave iPrism Web Security Administration Manual

iPrism
In the WCCP frame, select your version (WCCP v1 or WCCP v2) from the Version dropdown
2.
list.
In the Router dropdown list, select the IP address of your router, or, if you need to add a Router,
3.
click Add.
To set the WCCP password, click Set Password.
4.
Refer to the iPrism Knowledgebase for information on configuring various versions of the WCCP
router:
www.edgewave.com/support/web_security/knowledgebases.asp

Configuring SMTP Relay Settings

iPrism uses the SMTP protocol to perform the following types of communications:
• reports
• email alerts
• notifications (upgrades, filter list problems, registration)
• access requests
Chapter 7 System Settings
Figure 86. WCCP selection
Administration Guide
128