Adding A Quota - EdgeWave iPrism Web Security Administration Manual

iPrism

Adding a Quota

From the Quotas window, click Add.
1.
Enter a name for the quota.
2.
Select Enabled to turn on the quota or Disabled to turn it off (save for later use).
3.
Note: When a quota is disabled, the ACL associations still appear even though
the quota is not being enforced. iPrism will activate the quota enforcement for
those ACLs when the quota is enabled.
In the Threshold frame, specify the quota parameters.
4.
• Criteria: Choose the measurement to be used for assessing the quota.
• Value: Enter the number of units (depends on the criteria) for this quota.
• Reset: Choose the duration of each unit for this quota. For example, if you chose Session
Duration as the criteria, and 60 for the value, choosing 1 day for the reset value means the
quota is reached if the user's session is 60 minutes in one day. The quota resets at the end of
the day so that the user has up to 60 minutes each day.
• Relative threshold: The user gets notified when this percentage of the quota has been
reached.
In the ACL Categories frame, click Select and choose the categories to be applied to the quota.
5.
Click OK to return to the Quotas window.
Chapter 3 Profiles & Filters
Figure 20. Quota Reached
Administration Guide
35