Ftp Settings - EdgeWave iPrism Web Security Administration Manual

iPrism
If you have completed all your administrative changes, click Activate Changes to activate the
5.
changes immediately. If you do not Activate Changes now, you will be prompted to do so before
logging out of iPrism.

FTP Settings

From the iPrism Home Page, select System Settings, then Event Logging.
1.
In the FTP Settings frame, check Enable FTP export.
2.
Type the FTP Host, FTP Directory, FTP Username, and FTP Password in their respective
3.
fields.
Click Save.
4.
If you have completed all your administrative changes, click Activate Changes to activate the
5.
changes immediately. If you do not Activate Changes now, you will be prompted to do so before
logging out of iPrism.
High Availability
High Availability (HA) enables two iPrisms to run in parallel on a single network. One iPrism does the
filtering while the other remains in standby mode, ready to take over in case the primary iPrism
becomes inactive.
Chapter 7 System Settings
Figure 69. Event Logging – FTP Settings
Administration Guide
113