Pending Request Options - EdgeWave iPrism Web Security Administration Manual

iPrism
Check Enabled.
3.
Type IP addresses in the IP Start and IP End fields to define the range of IP addresses that will
4.
be allowed to access iPrism from the external interface. Only workstations in this range of IP
addresses will be able to configure iPrism via the external interface.
Click OK.
5.
Click Save to save your changes.
6.
If you have completed all your administrative changes, click Activate Changes to activate the
7.
changes immediately. If you do not Activate Changes now, you will be prompted to do so before
logging out of iPrism.

Pending Request Options

When a user is surfing the Internet and receives an Access Denied message for a blocked page,
they can use click Request Access to send a message to the iPrism administrator to explain why
they need access to the site. The administrator may review the request and decide whether or not to
grant access. No administration privileges are required to submit an access request. (If a request is
granted, the requesting user will be allowed to access the site.)
To view a list of pending requests, see
Chapter 7 System Settings
Figure 88. Co-Management Network
Figure 89. Enabling the Co-Management Network
Pending Requests.
Administration Guide
130