Proxy And Configuration Ports - EdgeWave iPrism Web Security Administration Manual

iPrism

Proxy and Configuration Ports

If desired, you can reconfigure the primary client proxy port of 3128, a secondary proxy port, or the
standard administration port of 80.
Important: Remote Filtering will not function properly if iPrism's configuration
port is not set to the default of port 80.
Primary Proxy Port: 3128 is the default TCP port number used for proxy requests from proxy mode
clients (browsers). If you change this port number after client configuration, clients will need to be
reconfigured. This port number is meaningful to proxy mode clients, as well as bridge (transparent)
mode installations where some of the user community is proxied to iPrism (e.g., Terminal Services
users). This port number does not pertain to bridge (transparent) mode traffic.
Secondary Proxy Port: You can set up an additional proxy port. This allows clients that are already
set up to use a proxy port other than the primary port. For example, if you have some existing clients
that are configured to proxy to port 8080, you would set the secondary proxy port to 8080.
If you do not set the secondary proxy port, only the primary proxy port will be used.
You can test the new port settings by proxying to the new proxy port.
Chapter 7 System Settings
Figure 91. Ports
Administration Guide
132