Bridge (Transparent) Mode - EdgeWave iPrism Web Security Administration Manual

iPrism
iPrism Installation Guide
Refer to the

Bridge (Transparent) Mode

In bridge (transparent) mode, the iPrism is an "in-line installation" which has 2 network (NIC)
connections. This mode is recommended for full network production deployment.
In this mode, iPrism is installed between the firewall and the switch. All network traffic destined for
the Internet (e.g., email and web) flows through the iPrism, and a single IP address is used by both
interfaces. This is the preferred mode in which to deploy and operate an iPrism in production.
Chapter 2 Overview
Figure 2. Deploying iPrism in Proxy Mode
for detailed information.
Administration Guide
11