EdgeWave iPrism Web Security Administration Manual page 77

iPrism
From the appropriate Authentication dropdown list, select which Authentication mode is to be
4.
used if Always attempt manual login is selected in Advanced Auto-Login settings (see step 8
below). If Always attempt manual login is selected, one of the following options must be
selected here to specify how to handle the manual login.
From the Failed Option: dropdown list, select a failover option to specify what happens if
5.
authentication fails (Use Network Profile or Disable Web Access). By default, Use Network
Profile is selected; the network profile will be applied to web filtering.
Configure your authentication mode and settings. For detailed explanations of authentication
6.
modes and Auto-login in both proxy and bridge (transparent) modes, see
Authentication Mechanism.
To specify a timeout value, select an option from the Timeout dropdown list and type the number
7.
of minutes in the Min field.
Click Advanced Auto-Login to specify how to handle failed Auto-Login authentication. Available
8.
options are:
• Always attempt manual login
• Never attempt manual login
Notes:
For iPrism upgrades or a new iPrism setup, select Always attempt manual
login.
Chapter 4 Users & Networks
Figure 44. Advanced Auto-Login
Administration Guide
Choosing an
66