Table of Contents
Advertisement
iPrism
To view the routing table:
•
From the iPrism home page, select System Status, then Routing Table.
A list of the network routes is displayed. To refresh the list, click Refresh.
Security Log
The security log is a read-only window that displays the last time your system received a filter list
update, the last time there were configuration changes, the last time a backup was performed, the
last time a remote filtering policy was delivered to the portal, and information about IP accesses,
email alerts, overrides, and automatic reports.
You can save this file as a text file, and/or print it. This can be useful to iPrism Technical Support to
assist in troubleshooting.
To view the security log:
•
From the iPrism home page, select System Status, then Security Log.
You can clear or refresh the log at any time by clicking Clear or Refresh, respectively.
If no update was available the last time iPrism checked, the status reads "empty update."
Status
The Status window displays the status of iPrism(s) on your network, such as amount of uptime,
RAID status, System Memory and CPU usage, whether your filtering and proxies are running, the
age of your filter list, and network utilization statistics.
You can view information about the status of your iPrism unit, as well as utilization data, in the
Access Event Status section (see
•
Uptime: The days, hours, and minutes that your iPrism has been continuously running.
•
High Availability: Whether or not High Availability is enabled (running).
•
System: The amount of system memory your iPrism is consuming.
•
CPU: The percentage of CPU that your iPrism is using.
•
RAID: Status of the RAID disk (if your iPrism model contains RAID).
•
Filtering Status
Chapter 8 System Status
Event
Log). All of the fields in this area are read-only.
Administration Guide
149
Advertisement
Table of Contents
Need help?
Do you have a question about the iPrism Web Security and is the answer not in the manual?
Questions and answers