EdgeWave iPrism Web Security Administration Manual page 168

iPrism
Select Stand Alone from the iPrism Mode dropdown list.
4.
Click OK.
5.
Select System Settings, then System Preferences.
6.
In the System Updates frame, click Update Now.
7.
You will be prompted to confirm your decision (click Yes), and will be notified that the update will
commence within 15 minutes. Download time will vary depending on network load.
To upgrade the slaves:
Log into a slave iPrism.
1.
From the iPrism home page, select System Settings, then Central Management.
2.
Select Stand Alone from the iPrism Mode dropdown list.
3.
Click OK.
4.
Select System Settings, then System Preferences.
5.
In the System Updates frame, click Update Now.
6.
You will be prompted to confirm your decision (click Yes), and will be notified that the update will
commence within 15 minutes. Download time will vary depending on network load.
Repeat these steps for each slave you want to upgrade.
7.
After you have upgraded all slaves, add them back to the master iPrism. See
8.
Master/Slave Configuration
Chapter 9 Central Management
for details.
Administration Guide
Setting Up a
157