Setting The Preset Search Channel - Yaesu WIRES-X HRI-200 Instruction Manual

Setting the preset search channel

The local node operation method is selected by setting the operation mode of the WIRES-X software (See page 23).
● Operating with 1 transceiver
Select "Digital DW". This permits setting the "Dual Watch Timing" and "Preset Search CH".
● Operating with 2 transceivers
Select "Digital Double". This permits setting the "Preset Search CH".
[Operating with 1 transceiver]
Dual Watch Timing......................Allows setting the preset search channel monitoring interval.
Preset Search CH
Operation ....................................Displays either "Dual watch" or "ON: Digital" in accordance with the operation method selected
Frequency ...................................Input the frequency of the preset search channel in MHz units
SQL code ....................................Set to "OFF".
Power .........................................For transmission power, you may select "High", "Mid", or "Low".
How to Use
by the "Operation mode".
Tip When using code squelch, select from a range of 001 to 126.
[Operating with 2 transceivers]
Advanced Operations
34