Yaesu WIRES-X HRI-200 Instruction Manual page 67

Connect ......................................Right-click and select a node, then select this command to initiate the connection to the
Get Info .......................................Right-click and select a node, then select this command to display the information of the
Window default ...........................Selecting this command divides the left side of the screen into three equal sized windows.
Add Bookmark list .......................Right-click and select a node, then select this command to bookmark the selected node. Set
Node Reject ................................Right-click and select a node, then select this command to register the selected node to the
MyRoom Reject ..........................This item appears when your station opens an open room.
MyRoom member .......................This item appears when station opens a closed room or a GM room.
Add GM member ........................This item appears when your node operates as a GM node and connects to a GM room.
■
Active room window
Active rooms are listed here.
Each item in the list indicates the following information:
● Icons
Icons appear on the left side of each column to indicate the operating mode and connection status of the node.
Open room, no node is connecting to the room
Open room, nodes are connecting to the room
Closed room, no node is connecting to the room
Closed room, nodes are connecting to the room
GM room, no node is connecting to the room
GM room, nodes are connecting to the room
● Information items
The node information consists of 8 items.
Room ID .....................................The room user ID (consisting of up to 16 alphanumeric characters). The access code for a
DTMF ..........................................The room DTMF ID (5-digit number). The access code for an analog operation.
Act ..............................................The number of activities (the number of nodes connecting to the room)
Room name ................................The room name set by the owner appears.
City .............................................The room location. If the room is located in Japan, the city, ward, town, and village names
State ...........................................The room location. If the room is located in Japan, the prefecture name appears. If the room is
Country .......................................The country name of the room location
Comment ....................................The room information and Information set by the node owner appears.
WIRES-X Software
selected node.
Tip
You may not be able to connect to the selected node in some cases, such as when the other nod is
connecting to another node.
selected node (such as the ID and call sign) in the pop-up window. When a node that you have
previously connected to, and received its QSL card image, is selected, the QSL card image
also appears.
the group window to "Bookmark list" to display the bookmarked node in the list.
connection refusal setting list. This rejects connection requests from the selected node.
Right-click and select a node, then select this command to add the selected node to the
connection refusal list to your room.
Right-click and select a node, then select this command to add the selected node to the
member list of your room.
Right-click and select a node, then select this command to add the selected node to the
member list of the GM room you are currently connecting to.
digital operation.
Tip In the group window, "Call/RmName" appears.
appear. If the room is located outside Japan, the city name appears.
located outside of Japan, the state or province name appears.
Tip Depending on the location, this may be blank.
Main Screen
67