Yaesu WIRES-X HRI-200 Instruction Manual page 84

<ID>
Interval time ................................The ID transmission interval can be set from every 5 minutes to every 60 minutes in 1 minute
Calibrate
Allows you to set each of the CW sound tone and announcement sound tone.
CW
Speed .........................................Set the CW code speed. The unit is WPM ("PARIS"). The higher the value is set, the faster the
Volume ........................................Set the CW transmission sound volume. The higher the value is set, the higher the volume
Pitch ............................................Set the pitch of sound. The frequency unit (Hz) is used. (The default setting is 700 Hz).
Voice
Voice ...........................................Allows you to select the sound type.
Speed .........................................Set the sound speed. The higher the value is set, the faster the announcement will be output
Volume ........................................Set the sound volume. The higher the value is set, the higher the volume becomes (The
WIRES-X Software
increments.
Caution At the node operating frequency, be careful not to interfere other stations when setting and operating
your station.
code becomes (The default setting is 30 WPM).
Tip
WPM (Words per minutes/PARIS) is the CW keying speed unit standardized by the ARRL (American Radio
Relay Reague) to calculate how many 5-letter words are transmitted per 1 minute.
becomes (The default setting is 50).
Tip The available options differ depending on the OS.
(The default setting is 0).
default setting is 90).
Main Menu
84