Yaesu WIRES-X HRI-200 Instruction Manual page 81

Room ID ......................................................Set the ID (user ID or DTMF ID) of the room you want to connect to every time.
DTMF #55555 ..............................................Set whether or not to accept the DTMF #55555 command.
● General settings
Unlimited TOT .............................Set whether or not to limit the connect time by activating the timeout timer (TOT) when your
TOT.............................................Set the connection duration to specify how long you desire to stay connected to a node/room.
WIRES-X Software
• Disconnect detection ... 30 seconds (If the disconnection state continues for 30
• Others ......................... For the room specified as the ordinary connection
Tip Setting "Return to Room" to ON enables you to enter the ID in this field.
ON (with a check-mark) .......... Accepts the DTMF #55555 command (valid).
OFF (without a check-mark) ... Does not accept the DTMF #55555 command
node is connected to a node or room.
ON (with a check-mark) .......... Deactivates the timer (Does not limit the connect time).
OFF (without a check-mark) ... Activates the timer (Limits the connect time) (default setting).
Caution
When the "Return to Room" checkbox is checked and a connection room is set, the connection will be
maintained regardless of the "Round QSO Room connection" setting.
When the set time has passed, the connection will be severed automatically.
However, if voice communication is being performed (The "INTERNET" or green "ON-AIR"
status indicator appears), when the set time has passed, the connection will be maintained
until 20 seconds have passed after the communication finishes.
Cautions • This setting is valid when "Unlimited TOT" is set to OFF (the timer is activated).
• When "Return to Room" is ON and your node connects to the specified room, this setting will be
ignored.
set it back to ON, go to the "Call settings" screen of the
WIRES-X software or use the #55555 command.)
seconds or longer, connection is initiated to the connection
destination.)
destination, "Unlimited TOT" on the "General settings"
screen of the WIRES-X software will be ignored.
(invalid) (default setting).
Main Menu
81