Download Print this page

Advertisement

Quick Links

IMRS (Internet-Linked Multi-Site Repeater System):
Currently our Glenada Hill UHF repeater system can be linked to a similar repeater which is operating in Coos Bay
on 147.320 MHz under callsign K7REA. The link is controlled by the DG-ID setting in your radio and the audio link
is completed from our repeater thru the internet to the repeater in Coos Bay. While this link is active any digital
C4FM user in Florence can communicate with other digital C4FM users in the Coos Bay area. Once established the
link remains open for thirty (30) seconds from the end of the most recent digital transmission.
There are some informative "beeps" that occur as follows:
1 beep: Connection to remote repeater established
2 beeps: Link has been dropped
3 beeps: Connection failed on one or more repeaters
Additionally, we have a third repeater (Sherwood) which can be accessed during our testing phase. This repeater is
actually located SOB at AC0WN's QTH and will eventually be installed in Sherwood, OR. The Sherwood repeater is
on a test frequency pair at 440.275 +5mhz
To use the IMRS system you set your transceiver's TX DG-ID as follows:
Florence Repeater Only: 00
Florence Repeater and Coos Bay Repeater: 02
Florence Repeater and Sherwood Repeater: 03
All linkable repeaters (currently 3): 99
IMPORTANT: Once you are done with the link please remember to return your transceiver's TX DG-ID back to 00.
Glenada Hill Yaesu C4FM UHF Repeater Features & Settings

Advertisement

loading

Summary of Contents for Yaesu C4FM

  • Page 1 Coos Bay. While this link is active any digital C4FM user in Florence can communicate with other digital C4FM users in the Coos Bay area. Once established the link remains open for thirty (30) seconds from the end of the most recent digital transmission.
  • Page 2 To set TX DG-ID on a FT3DR: Press GM button for 2 seconds Press GM button briefly Turn DIAL to set desired TX DG-ID Press BACK button twice GM Button...
  • Page 3 To set TX DG-ID on a FT2DR: Press GM button for 2 seconds Press GM button briefly Turn DIAL to set desired TX DG-ID Press BACK button twice GM Button...
  • Page 4 To set TX DG-ID on a FTM-400: Press GM button for 2 seconds Press GM button briefly Turn DIAL to set desired TX DG-ID Press BACK button twice...
  • Page 5 To set TX DG-ID on a FTM100D: Long press GM Short press GM Turn dial to desired DG-ID Press Back button twice...
  • Page 6 FT2DR and FT3DR this is a quick press, while on the FTM-400 it is approximately a 2 second hold. Once Wires-X is engaged thru the Glenada Repeater, any digital C4FM radio in Wires-X mode and on frequency can transmit and contribute to the Wires-X conversation. Any other radio not in Wires-X mode will hear both Wires- X and local traffic on the repeater, but when transmitting will only be heard on the local repeater (and not on the Wires-X internet link).
  • Page 7 To set Wires-X DG-ID on a FT3DR: Press DISP button for 2 seconds Press Wires-X soft button briefly Turn DIAL to select 5. DG-ID Press 5. DG-ID Turn DIAL to select 70 Press BACK button three (3) times...
  • Page 8 To set Wires-X DG-ID on a FT2DR: Press DISP button for 2 seconds Press Wires-X soft button briefly Turn DIAL to select 5. DG-ID Press 5. DG-ID Turn DIAL to select 70 Press BACK button three (3) times...
  • Page 9 To set Wires-X DG-ID on a FTM-400: Press DISP button for 2 seconds Press Wires-X soft button briefly Turn and press DIAL to select DG-ID TX Turn DIAL to select 70 Press DIAL to save change Press BACK button two (2) times...
  • Page 10 To set Wires-X DG-ID on a FTM100D: Long press DISP Turn DIAL to Wires-X #7 Short press DISP Turn dial to DG-ID #2 Short press DISP Press Back button twice...