Yaesu WIRES-X HRI-200 Instruction Manual page 82

Announcement
Cautions • The announcement output function is activated only for a analog operation. This function is not available for a digital operation.
• The same announcement will not be transmitted again for about 20 seconds.
Connect request message ..........Set whether or not to inform when receiving a connection request from another node while
Room IN/OUT .............................Set whether or not to inform when other nodes come to or go out from the room you are
Room logon node info ................Set whether or not to include the number of nodes connected (the number of activities) in the
DTMF #66666 .............................Set the announce operation when receiving the #66666 command.
DTMF #55555 .............................Set the announce operation when receiving the #66666 command.
DTMF * Disconnect ....................Set the response operation when receiving the * DTMF command.
Remote control ...........................Set whether or not to remotely control the WIRES-X software.
Password ....................................Set the access authentication password from the WIRES-X remote monitor software
WIRES-X Software
connecting to a node/room on the Internet.
Setting it to ON by inserting a check-mark, the announcement "Connect request from *****" will
be transmitted (***** refers to a node ID).
currently connecting to.
Setting it to ON by inserting a check-mark, an announcement such as "***** IN" or "***** OUT"
will be transmitted (***** refers to a node ID).
announcement when connecting to a room.
ON (with a check-mark) .......... Includes the number of activities in the announcement.
OFF (without a check-mark) ... Informs only the ID of the room you are connecting to.
Caution This setting also affects the DTMF #66666 command response and the content when VOICE is
selected from ID.
Setting this to ON (with a check-mark) transmits an ID announcement to the DTMF #66666
command.
Setting this to ON (with a check-mark) transmits a response announcement to the DTMF
#55555 command.
Tip Even when this setting is OFF (without a check-mark), if "DTMF #55555" is set to ON on the "Call settings"
screen of the WIRES-X software, the command operation will be executed.
ON (with a check-mark) .......... Accepts the * command as the #99999 command and sever the
OFF (without a check-mark) ... Ignores the * command.
Caution The DTMF command is valid only for an analog operation. The DTMF command does not function for
a digital operation.
ON (with a check-mark) .......... Allows access from the WIRES-X remote monitor software
OFF (without a check-mark) ... Prohibits access from the WIRES-X remote monitor software
Tip To use the web monitoring function of the remote monitor software "WIRESMON-X.exe", setup the
dedicated plug-in separately.
"WIRESMON-X.exe".
Tip Set "Remote control" to ON to enter text in this field.
Example: "This is JQ1YBG WIRES X. Connected to *****. Three
Nodes."
Example: "This is JQ1YBG WIRES X. Connected to *****."
connection to another station.
"WIRESMON-X.exe" (enables remote-control operations).
"WIRESMON-X.exe" (disables remote-control operations).
Main Menu
82