Yaesu WIRES-X HRI-200 Instruction Manual page 16

4
Click [Local Area Connection]
Tip Depending on the OS or connection environment, "Ethernet" may
appear.
The "Local Area Connection Status" dialog box will appear.
5
Click [Details]
The "Network Connection Details" dialog box will appear.
6
Write down the "IPv4 Address" and "IPv4 Subnet Mask" values
The "IPv4 Address" value is the IP address you set on the PC.
7
Click [Close]
The "Local Area Connection Properties" dialog box will appear
again.
Preparation
Preparing an Internet Environment
16