Yaesu WIRES-X HRI-200 Instruction Manual page 7

Do not use voltages other than the specified power supply
voltage.
Doing so may result in fire and electric shock.
Do not dismantle or modify the device.
This may result in injury, electric shock or equipment failure.
Do not handle the plug and connector etc. with wet hands.
This may result in injury, electric shock or equipment failure.
If smoke or an unusual odor comes from the device, turn off
your PC connected to the device and unplug the connection
cable.
This may indicate a fire, liquid leak, overheating, damage,
ignition or equipment failure. Please contact Yaesu Technical
Support or the retail store where you purchased the device.
Do not place the device in areas that may get wet easily
(e.g. near a humidifier).
This may result in fire, electric shock or equipment failure.
Do not bend, twist, pull, heat and modify the connection
cables in an unreasonable manner.
The cables may be cut or damaged and result in fire, electric
shock or equipment failure.
Do not place this product near a heating appliance or in a
location exposed to direct sunlight.
This may result in deformation and discoloration.
Do not place this product in an environment of dust and
humidity.
Doing so may result in fire or equipment failure.
Do not wipe the case using thinner and benzene etc.
Use only a soft dry cloth to wipe stains from the case.
When the device will not be used for a long period of time,
unplug the connection cable for safety.
Disconnecting the power cable may prevent electrical damage,
fire or overheating.
Do not throw or subject the device to strong impact forces.
This may result in equipment failure.
Do not place magnetic cards or video tapes near this
device.
The data on the cash card or video tape etc. may be erased.
Keep out of the reach of small children.
Mishandling this device may result in injuries to children.
Introduction
WARNING
Do not pull on the cable when plugging and unplugging the
connection cables.
Hold the plug or connector when unplugging. Tugging on the
cable may result in fire, electric shock or equipment failure.
Do not use the device when the connection cables are
damaged, or when the connector cannot be plugged in
tightly.
Please contact Yaesu Technical Support or the retail store where
you purchased the device as this may result in fire, electric
shock or equipment failure.
Do not allow metallic objects such as wires, or liquids such
as water to get inside the product.
This may result in fire, electric shock or equipment failure.
Refrain from using headphones and earphones at a loud
volume.
Continuous exposure to loud volumes may result in hearing
impairment.
If there is thunder or lightning, turn off the PC connected to
the device and remove the power plug from the wall outlet.
This may result in fire, electric shock or equipment failure.
CAUTION
Do not place heavy objects on top of the connection cables.
The connection cables may be damaged, resulting in fire or
electric shock.
Do not operate the device near a radio or TV.
This may result in electromagnetic interference.
Do not use optional products other than those specified by
Yaesu company.
Use of non-specified products may result in equipment failure or
damage.
Do not place the device on an unsteady or sloping surface,
or in a location where there is strong vibration.
The device may fall over or drop, resulting in fire, injury or
equipment failure.
Do not stand on top of the product; do not place heavy
objects on top or insert objects inside it.
This may result in damage or equipment failure.
Do not open the case of the product.
This may result in injury, electric shock or equipment failure.
About WIRES-X Connection Kit
7