Yaesu WIRES-X HRI-200 Instruction Manual page 64

Tip
The QSL card image file must meet the following conditions.
• Format: bitmap (.bmp)
• Resolution: 320 x 240
● Transmitting the QSL card image of your room
1
In the "Settings" window, display the "Round QSO room settings" screen
2
Click [...] on the bottom right side of "QSL exchange"
The window where you specify the file will appear.
3
Select a desired file, then click [Open]
The "WIRES ID information" screen will appear again. The file path will also appear below the "QSL exchange" screen.
Tip You can also enter the file path directly.
4
Click [OK]
The setting will be saved and the "Settings" window will close.
Now each time a node on the Internet connects to your room, the specified file will be transmitted as your QSL card image.
How to Use
Useful Functions
64