Yaesu WIRES-X HRI-200 Instruction Manual page 86

● Make list file
Group window
From this tab, configure the settings to output the list in the group window as a file.
Tip The content output from this tab will be affected by the display setting in the group window.
Active ID
From this tab, configure the settings to output the list in the active node window as a file.
Room ID
From this tab, configure the settings to output the list in the active room window as a file.
MyRoom logon ID
From this tab, configure the settings to output the list of nodes connecting to your room as a file.
Caution
This screen will not appear when your room is not activated.
<Universal>
Enable list out .............................Setting this to ON (with a check-mark) activates the file output function.
XML Style ...................................Specify the data output format.
HTML/XML File name .................Enter the file name of the list. Use the extension ".html" for an HTML file, and ".xml" for an XML
WIRES-X Software
ON (with a check-mark) .......... Outputs in XML format.
OFF (without a check-mark) ... Outputs in HTML format (tab-separated format or table-layout
Tip This setting can be configured only when "Enable list out" is set to ON.
file.
The file name can also be specified from the file selection screen displayed by clicking [...] on
the right.
Tip This setting can be configured only when "Enable list out" is set to ON.
Caution
Do not use the same file name as other tabs.
format).
Main Menu
86