Yaesu WIRES-X HRI-200 Instruction Manual page 43

4
In the "Operation mode" area, select "Digital"
5
Click [OK]
The "GM (Group Monitor) Guide" window will appear again.
6
Click [Node Operation]
The "User ID Change" window will appear.
Tip You can also display the window by clicking "Settings" from the "File"
menu to display the "WIRES ID information" screen, then clicking
[User ID change].
7
In the "Style" area, select "GM".
8
Click [Apply], then [OK]
The "GM (Group Monitor) Guide" window will appear again.
9
Click [Close]
Your node starts working as a GM node.
● Connecting to a GM room on the Internet
1
Click [GM] on the bottom right side of the main screen of the
WIRES-X software
The "GM (Group Monitor) Guide" window will appear.
2
Click [GM Room select]
The "GM Room list" window will appear.
Tip You can also display the window by clicking "Node-Info" from the
"View" menu to display the "My Node information" window, then
clicking [Select change].
How to Use
Advanced Operations
43