Kohler Command Pro CV960 Service Manual page 83

Oil Filter
Housing
Figure 8-24. Removing Oil Filter Housing.
assembly requires individual servicing.
Figure 8-25. Removing Nipple.
Housing
Spring
Figure 8-26. Disassembled Cup and Spring.
Mounting
Screw
Figure 8-27. Rubber Valve and Spring Removed
from Cup.
Remove Ignition Modules
Nipple
Figure 8-28. Removing and Disconnecting Ignition
Modules.
Cup
Nipple
c. Remove the rubber valve and spring from the
Rubber
Spring
Valve
the modules.
2. Remove the mounting screws and disconnect
the kill lead from the ignition modules. Note
the position of the ignition modules and wiring
Mounting
Screws
Kill Lead
Section 8
Disassembly
Cup
8
Ignition
Module
8.7