Section 7
Electrical System and Components
condition of the part.
Figure 7-17. Powered Tester.
one of the four lights will illuminate indicating
the
Figure 7-18. Pressing Test Button.
7.14
does not represent the
of the part.
as a result of an inadequate ground lead
connection. Make certain the connection
location is clean and the clamp is secure.
tested.
Regulator.
represent the condition of the part.
of the four status lights will illuminate, indicating
the condition of the part.
as a result of an inadequate ground lead
connection. Make certain connection
location is clean and clamp is secure.
does not