Kohler Command Pro CV960 Service Manual page 119

Figure 10-48. Installing Pipe Plug in Cylinder
Heads.
Install Guide Plate, Pivot Studs, Push
Rods and Rocker Arms
(110 in. lb.).
down
No. 1 side
No. 2 side
Push Rods
Figure 10-49. Installing Guide Plate, Pivot Studs
and Push Rods.
29.3 N·m (260 in. lb.)
Pipe
Plug
12.4 N·m
up
Guide
Plate
Pivot
Studs
Adjusters
Rocker Arms
Figure 10-50. Installing Rocker Arms, Pivots and
Adjusters.
Adjust Valve Clearance
clockwise
Turn Adjusters (Clockwise)
Figure 10-51. Turning Adjusters In To Retain Push
Rods.
Section 10
Reassembly
Pivots
10
10.13