Kohler Command Pro CV960 Service Manual page 78

Section 8
Disassembly
Shut Off Fuel Supply
Drain Oil from Crankcase and Remove Oil
Filter
Figure 8-2. Removing Oil Filter.
2. Remove the dipstick and one of the oil drain
plugs.
Figure 8-3. Removing Dipstick from Tube.
Drain Plug
(Starter Side Shown)
Figure 8-4. Oil Drain Plug Location.
8.2
3. Allow ample time for the oil to drain from the
crankcase.
hardware from the engine.
Remove Cylinder Shrouds and Blower
Housing
1. Remove the top mounting screw and loosen the
Cylinder Shroud
Figure 8-5. Removing Cylinder Shrouds.
2. Remove the four mounting screws and separate
the blower housing from the backing shroud
(equipped models) may be removed with the
blower housing.
Figure 8-6. Removing Blower Housing.
Mounting
Screws