Kohler Command Pro CV960 Service Manual page 71

Brush Replacement
necessary.
Figure 7-36. Removing Brush Holder.
Figure 7-37. Service Brush Kit.
armature, drive lever, and frame are installed, if
Electrical System and Components
Starter Service
wear or damage as required.
Starter Reassembly
a. Install the stop collar down onto the armature
pliers to compress it in the groove.
c. Slide the stop collar up and lock it into
place, so the recess surrounds the retainer
in the groove. If necessary, rotate the pinion
outward on the armature splines against the
retainer to help seat the collar around the
retainer.
Figure 7-38. Installing Stop Collar and Retainer.
Section 7
7
7.21