3. Remove the lower mounting screw and pull the
Oil Fill Tube
Figure 8-7. Removing Oil Fill Tube.
Remove Electric Starter Motor
1. Disconnect the leads from the starter.
Mounting
Screws
Figure 8-8. Removing Electric Starter.
Remove Air Cleaner Assembly
1. Disconnect the breather hose from the air cleaner,
and the formed vent hose from the vent port on
the carburetor.
Figure 8-9. Air Cleaner Mounting Details.
Lower Mounting
Screw Location
Figure 8-10. Mounting Screws.
Figure 8-11. Removing Air Cleaner Assembly.
Mounting Nuts
Ground Lead
Breather
Hose
3. Remove the two screws securing the air cleaner
and main control bracket to the intake manifold
Mounting Screws
4. Remove the air cleaner from the engine as an
Section 8
Disassembly
Vent Hose
8
8.3