Kohler Command Pro CV960 Service Manual page 81

Control
Bracket
Figure 8-15. Removing Control Bracket.
Figure 8-16. Removing Governor Lever.
Remove Carburetor
WARNING: Explosive Fuel!
running, since spilled fuel could ignite if it comes in contact
with hot parts or sparks from ignition. Do not start the
engine near spilled fuel. Never use gasoline as a cleaning
agent.
2. Remove the fuel inlet hose from the carburetor.
3. Remove the carburetor, and linkages as an
Lower
Mount
Figure 8-17. Removing Carburetor.
4. Remove the carburetor gasket.
5. The carburetor and linkages can be separated as
Remove Oil Sentry
Governor
1. Disconnect the lead from the Oil Sentry
Lever
2. Remove the Oil Sentry
Figure 8-18. Oil Sentry
Pan.
necessary.
™
(If Equipped)
™ switch from the oil pan.
Pressure
Switch
™
Switch Location in Oil
the cylinder heads and backing shroud assembly.
Section 8
Disassembly
™ switch.
8
8.5