Kohler Command Pro CV960 Service Manual page 121

Turn Adjuster
Figure 10-53. Establishing the "0" Lash Point.
complete revolutions clockwise
nut (1/6 turn), or a total of 4-1/6 turns
Turn 4-1/6
Revolutions
From "0" Lash
Figure 10-54. Setting Valve Lash (Non-Bled Lifters).
7.3 N·m (65 in. lb.)
counterclockwise and align the
clearance is 0.25 mm (0.010 in.).
Check Assembly
Important:
Install Valve Covers
Rotate Push Rod
and Feel for
Drag
four (4)
Figure 10-55. Installing Seal on Valve Cover.
Figure 10-56. Torquing Valve Cover Screw.
Seal
7.9 N·m (70 in. lb.)
Section 10
Reassembly
10
10.15