Input Voltage Range Selection - Ametek 2003RP User And Programming Manual

3.3 Input Voltage Range Selection

WARNING: Voltages up to 360 VDC and 270 VAC are present in certain sections of
this power source. This equipment generates potentially lethal voltages.
DEATH: On contact may result if personnel fail to observe safety precautions. Do
not touch electric circuits when power is applied. Servicing should only
be performed by trained personnel.
The input voltage range is configured by one wire. See Figure 3-3 or Figure 3-4 for the
location of this wire and the A4 board (DC Supply).