ROBBE-Futaba FX-32 Instruction Manual page 85

Alarm mode
*A mode which sounds an alarm every minute during the
remaining time up to the timer alarm time.
1. Change the setting by pressing ↑ or
↓ button.
[ ↑ ]: An alarm sounds every minute of the
elapsed time from timer start. (Conventional
mode)
[ ↓ ]: An alarm sounds every minute of the
remaining time up to the alarm time.
HOUR mode
*An HOUR mode counts up to 99 hours 50 minutes to the timer
modes.
● This mode is convenient when used at
engine maintenance period and other long
term measurements.
● When the HORU mode is set, "xx(hour) :
xx(minute)" is displayed on the count time
display. Seconds are not displayed.
● When the HORU mode is set, " : " blinks each
second during timer operation.
● When the HORU mode is set, the alarm
function/lap time measurement function are
inhibited.
<Functions of Linkage Menu> 85