ROBBE-Futaba FX-32 Instruction Manual page 72

The example for choosing System Type
R7008SB
R7003SB
System Type
■ FASSTest 18CH ---
■ FASSTest 12CH ---
Analog servos cannot be used with the R7008SB in the FASSTest 12CH mode.
•
■ FASST MULTI
■ FASST 7CH
■ S-FHSS
72 <Functions of Linkage Menu>
R7008SB
R7003SB
FASSTest system receiver mode. Applicable with the telemetry sensor unit. Up to
18 channels (linear 16+ON/OFF2) can be used.
FASSTest system receiver mode. Applicable with receiver voltage display. Up to 12
channels (linear10+ON/OFF2) can be used. Telemetry Sensor cannot be used, but
the response speed is a faster than that of the 18CH mode.
--- FASST-MULTI system receiver mode. Up to 18 channels (linear 16+ON/OFF2) can
be used.
--- FASST-7CH system receiver mode. Up to 7 channels can be used.
--- S-FHSS system receiver mode. Up to 8 channels can be used.
R617FS
R6004FF
R608FS
R616FFM
R6008HS
R6106HF
R6108SB
R6106HFC
R6208SB
R6203SB
R6014HS
R6203SBE
R6014FS
R6202SBW
R6203SB
R6303SB
R6203SBE
R6303SBE
R6202SBW
R6303SB
(
R6303SBE
R2006GS
R2106GF
R2008SB