ROBBE-Futaba FX-32 Instruction Manual page 167

Operations related to fine tuning VR
●VR selection
●Operation mode selection
*The operation modes which can be
selected depend on the function.
[Setting method]
1. Control selection
Use the touch sensor to move the cursor
(reverse-video) to the [CTRL] item and
touch the RTN button to call the selection
screen.
Move to the control you want to set by
turning the touch sensor to the left or right
and touch the RTN button.
2. Mode selection
Use the touch sensor to move the cursor to
the [MODE] item and touch the RTN button
to switch to the data input mode.
Turn the touch sensor to the left or right and
switch to the operation mode ([LIN.], [ATL+],
[ATL-], or [SYM.]) corresponding to the set
control and touch the RTN button.
3. Rate adjustment
Move the cursor to the [RATE] item and
touch the RTN button to switch to the data
input mode.
Turn the touch sensor to the left or right and
set the rate.
Initial value: 0%
Adjustment range: -100%~+100%
(When the RTN button is touched for 1 second, the rate is
reset to the initial value.)
Touch the RTN button to end adjustment
and return to the cursol move mode.
●Rate adjustment
(Fine tuning VR operation position)
[Fine tuning VR operation mode]
[LIN.] M i x i n g r a t e 0 % a t c e n t e r o f V R .
When the VR is turned clockwise and
counterclockwise, the mixing rate
increases and decreases, respectively.
[ATL+] Mixing rate 0% at left end of VR.
When the VR is turned, the mixing rate
increases.
[ATL-] Mixing rate 0% at right end of VR.
When the VR is turned, the mixing rate
increases.
[SYM.] When the VR is turned to the left or
right of the neutral position, the mixing
rate increases.
<Data> 167