ROBBE-Futaba FX-32 Instruction Manual page 129

Setting method
● Move the cursor to the ACT/INH item and
touch the RTN button to switch to the data
input mode.
Turn the touch sensor to the left and touch
the RTN button. (ON is displayed.)
● When setting a switch, move the cursor to
the [--] item of the switch and touch the RTN
button to call the selection screen, and then
select the switch and set its ON direction.
(Always ON at "--" setting)
(For a description of the switch selection
method, see the description at the back of
this manual.
● When setting a VR, move the cursor to the
Fine tuning "--" item and touch the RTN button
to call the selection screen, and then select
the VR. The adjustment rate can be set.The
VR operation mode can also be set.
(For a description of the fine tuning VR setting
method, see the description at the back of
this manual.)
● A mixing curve can be set.
(For a description of the curve setting
method, see the description at the back of
this manual.)
[Fine tuning VR operation mode]
[LIN.] M i x i n g r a t e 0 % a t c e n t e r o f V R .
When the VR is turned clockwise and
counterclockwise, the mixing rate
increases and decreases, respectively.
[ATL+] Mixing rate 0% at left end of VR.
When the VR is turned, the mixing rate
increases.
[ATL-] Mixing rate 0% at right end of VR.
When the VR is turned, the mixing rate
increases.
[SYM.] When the VR is turned to the left or
right of the neutral position, the mixing
rate increases.
<Model Menu (Airplane/Glider Functions)> 129