ROBBE-Futaba FX-32 Instruction Manual page 140

● When using this function, move the cursor
to the [ACT/INH] item and turn the touch
sensor to the left and touch the RTN
button. (ON is displayed.)
● Group/single mode switching
(For more information, see the description at the back of
this manual.)
●Manual/Auto mode selection
● When using a fine tuning VR, move
the cursor to this setting item and
press the EDIT button to call the
selection screen.
Select the VR and touch the RTN
button.
140 <Model Menu (Airplane/Glider Functions)>
Manual: Switches the function ON/OFF by switch
Auto: Trim mix function call can be linked to a stick,
etc. A stick switch, etc. separate from the function
ON/OFF switch is set.
● Ailerons, flaps, an elevators servo
speed setting
(For a description of the setting method, see
the description at the back of this manual.)
● C o n d i t i o n d e l a y s e t t i n g ( f o r a
description of the setting method,
see the description at the back of
this manual) and cut switch setting.