ROBBE-Futaba FX-32 Instruction Manual page 168

Operations related to servo speed
The servo speed at each function operation
(including flight condition switching) can be
adjusted. The servos operate smoothly at a
fixed speed corresponding to the set speed. The
operating speed (IN side) and return speed (OUT
side) can be set individually.
Switch the operation mode according to the set
function.
"SYM." mode: Used with ailerons and other
self neutral functions.
"LIN." mode: Used with functions which hold
the operation position of the throttle and
switch channel, etc.
[Setting method]
1. Use the touch sensor to move the cursor
(reverse-video) to the [MODE] item and
touch the RTN button to switch to the data
input mode.
Turn the touch sensor to the left or right
and switch to the operation mode ("SYM."
or "LIN.") corresponding to the set function
and touch the RTN button.
2. Move the cursor to the direction ([IN] or
[OUT]) item you want to set and touch
the RTN button to switch to the data input
mode.
Turn the touch sensor to the left or right and
set the speed.
Initial value: 0
Adjustment range: 0~27 (maximum delay)
(When the RTN button is touched for 1 second, the servo
speed is reset to the initial value.)
Touch the RTN button to end adjustment
and return to the edit mode.
168 <Data>
Servo speed setting