Table of Contents
Advertisement
CHAPTER 5: CLI Management
restore user
Syntax: restore user
Description: Restores the startup configuration as a user-defined configuration. If restoring default is successful,
the CLI asks if you want to reboot immediately or not. Pressing Y or y reboots the system immediately; if you
press N or n, the software returns to the CLI system. After restoring a user-defined configuration, all the
changes in the startup configuration are lost. After rebooting, the entire startup configuration replaces the
user-defined one.
Argument: None
Possible value: None
Example:
Giga Switch# restore user
Restoring ...
Restore User Configuration Successfully
Press any key to reboot system.
save start
Syntax: save start
Description: Saves the current configuration as the startup one. When you enter this command, the CLI saves
your current configuration to the nonvolatile Flash. If you want the configuration to work after rebooting, save
the configuration using the command save start.
Argument: None
Possible value: None
Example:
Giga Switch# save start
Saving start...
Save Successfully
Giga Switch#
save user
Syntax: save user
Description: Saves the current configuration as the user-defined configuration. When you enter this command,
the CLI saves your current configuration in the nonvolatile Flash as a user-defined configuration.
Argument: None
95
Advertisement
Table of Contents
