Gvrp Group Information; Stp Configuration - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

12-Port 1000BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
Parameter
JoinEmpty Message Packets
JoinIn Message Packets
LeaveEmpty Message Packets
Empty Message Packets
4.14.3 GVRP G I
ROUP
Parameter
Current Dynamic Group Number
VID
Member Port
Edit Administrative Control
Refresh

4.15 STP Configuration

The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding loops in switched
networks. When STP is enabled, ensure that only one path is active between any two nodes on the network at a
time. User can enable Spanning Tree Protocol on switch's web management and then set up other advanced
items. We recommend that you enable STP on all switches to ensure a single active path on the network.
68
Table 4-34 (Continued). GVRP Counter screen options.
Number of GARP BPDU with Join Empty message is received/
transmitted by the GARP application.
Number of GARP BPDU with Join In message is received/
transmitted by the GARP application.
Number of GARP BPDU with Leave Empty message is received/
transmitted by the GARP application.
Number of GARP BPDU with Empty message is received/
transmitted by the GARP application.
NFORMATION
Table 4-35. GVRP Group Information screen options.
The number of GVRP group that are created currently.
VLAN identifier. When GVRP group creates, each dynamic
VLAN group owns its VID. Valid range is 1 ~ 4094.
Those are the members belonging to the same dynamic VLAN
group.
When you create GVRP group, you can use Administrative
Control function to change Applicant Mode and Registrar Mode
of GVRP group member.
Refresh function can help you to see current GVRP group status.
Description
Description