Table of Contents
Advertisement
Parameter
Vendor OUI
Vendor Name
Vendor P/N
Vendor Rev (Revision)
Vendor SN (Serial Number)
Date Code
Temperature
Vcc
Mon1 (Bias) mA
Mon2 (TX PWR)
Mon3 (RX PWR)
Close button
4.3.2 C
ONFIGURATION
Use the Configuration menu to change each port's setting. To get to this screen, click on Config in the Port
menu. In this menu, you can set/reset the following functions. All are described in detail in Table 4-11.
Parameter
State
Table 4-10 (continued). Ports 11--12.
Description
Displays the Manufacturer's OUI code that's assigned by IEEE.
Displays the module manufacturer's company name.
Displays the manufacturer's switch's part number.
Displays the module revision.
Shows the manufacturer-assigned serial number.
Shows the date this SFP module was made.
Shows the SFP module's current temperature.
Shows the SFP module's working DC voltage.
Shows the SFP module's bias current.
Shows the SFP module's transmit power.
Shows the SFP module's receiver power.
Click on this button to close the window.
Table 4-11. Configuration screen options.
Description
From the drop-down menu, set the port's communication capability
to Enabled or Disabled. When enabled, traffic can be transmitted
and received via this port. When disabled, the port is blocked and no
traffic can be transferred through this port. Port State is configurable
by the user. If you set a port's state to Disable, then that port is
prohibited from passing any traffic.
Default: Enable.
CHAPTER 4: Web-Based Management
43
Advertisement
Table of Contents
