Virtual Stack - Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual

Parameter
Name
VID
IP Range
Incoming Port
Access Type
Action
Edit/Create
Delete
4.2.6 V S
IRTUAL TACK
Virtual Stack Management (VSM) is the group management function. To get to this option, click on Virtual
Stack in the System menu. Through the proper configuration of this function, switches in the same LAN will
be grouped automatically. Among these switches, one switch will be a master machine, and the others in this
group will become the slave devices.
VSM offers a simple centralized management function. You don't have to remember all devices' addresses,
since the administrator can manage the network with knowing only the Master machine's address. Instead of
Table 4-7. Management Security Configuration settings.
A name is composed of any letter (A–Z, a–z) and digit (0–9) with a
maximum of 8 characters.
VID supports two buttons for managed valid VLAN VID: Any and
Custom. The default is the Any button. When you click on the Custom
button, you can type in the VID number. The valid VID range is 1–4094.
The switch supports two options for the managed valid IP Range: Any
and Custom. The default is the Any button. When you click on the
Custom button, you can type in an effective IP range. The valid range
is 0.0.0.0–255.255.255.255.
The switch supports options for managed valid Port Range: Any and
Custom. The default is the Any button. When you click on the Custom
button, you can check the box(es) next to the ports that you would like
to be restricted in the management security configuration.
The switch supports two options for managed valid Access Type: Any
and Custom. The default is the Any button. When you click on the
Custom button, you can check the box next to the option you want to
use to access and manage the switch. The three options include HTTP,
Telnet, and SNMP.
The switch supports two options for managed valid Action Type: Deny
and Accept. The default is the Deny button. When you choose Deny,
you can't manage the switch. If you click on the Accept button, you can
manage the switch.
Click on this button to create a new management security entry, or to
modify an existing entry.
Click on this button to remove the selected management security
configuration entry from the management security table.
CHAPTER 4: Web-Based Management
Description
39