Black Box 12-Port 1000BASE-TX L2 Managed PoE Switch User Manual page 97

12-Port 1000BASE-TX L2 Managed PoE Switch with 2 SFP Dual Media Ports
Giga Switch(ip)# history 3
Command history:
13. ip
14. history
15. history 3
Giga Switch(ip)#
logout
Syntax: logout
Description: When you enter this command via a Telnet connection, you will log out of the system and
disconnect. If you connect the system through a direct serial port with an RS-232 cable, you will log out of the
system and return to the initial login prompt when you run this command.
Argument: None
Possible value: None
Example:
Giga Switch# logout
restore default
Syntax: restore default
Description: When you use this function in CLI, the system will prompt "Do you want to restore the default IP
address?(y/n)". If you choose Y or y, the IP address will restore to the default 192.168.1.1. If you choose N or n,
the IP address will keep the same one that you saved before.
If restoring the default is successful, the CLI asks if it will reboot immediately or not. Pressing Y or y reboots the
system immediately; otherwise, it goes back to the CLI system. After restoring the default configuration, all the
changes in the startup configuration are lost. After rebooting, the entire startup configuration resets to the
factory default.
Argument: None
Possible value: None
Example:
Giga Switch# restore default
Restoring ...
Restore Default Configuration Successfully
Press any key to reboot system.
94